Denon AVR-2113 Owner's Manual page 107

Setting items
Dynamic EQ On : Use Dynamic EQ.
Solve the problem of Off : Do not use Dynamic EQ.
deteriorating sound quality
as volume is decreased
is displayed when set to "On".
by taking into account
human perception and
NOTE
room acoustics. Works with
When the menu "Dynamic EQ" setting is "On", it is not possible to do
MultEQ ® XT.
"Tone Control" (vpage 102) adjustment.
Reference Level Offset 0dB (Film Ref) : This is the default setting and should be used when
Audyssey Dynamic EQ ® is
listening to movies.
referenced to the standard 5dB : Select this setting for content that has a very wide dynamic range,
film mix level. It makes such as classical music.
adjustments to maintain 10dB : Select this setting for jazz or other music that has a wider dynamic
the reference response range. This setting should also be selected for TV content as that is usually
and surround envelopment mixed at 10 dB below film reference.
when the volume is turned 15dB : Select this setting for pop/rock music or other program material
down from 0 dB. However, that is mixed at very high listening levels and has a compressed dynamic
film reference level is not range.
always used in music or
Setting is enabled when "Dynamic EQ" is "On" (vpage 104).
other non-film content.
Dynamic EQ Reference
Level Offset provides three
offsets from the film level
reference (5 dB, 10 dB, and
15 dB) that can be selected
when the mix level of the
content is not within the
standard. Recommended
setting levels are shown at
right.
Dynamic Volume Heavy : Most adjustment to softest and loudest sounds.
Solve the problem of large Medium : Medium adjustment to loudest and softest sound.
variations in volume level Light : Least adjustment to loudest and softest sounds.
between TV, movies and Off : Do not use "Dynamic Volume".
other content (between
quiet passages and
• is displayed when set to "Heavy", "Medium" or "Light".
loud passages, etc.) by
• If "Dynamic Volume" is set to "Yes" in "Audyssey ® Setup"
automatically adjusting to
(vpage 27), the setting is automatically changed to "Medium".
the user's preferred volume
setting.
DVD
Setting details
104
Graphic EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Graphic EQ" can be set when "MultEQ ® XT" setting (vpage 103) is "Graphic EQ".
Setting items
Speaker Selection All : Adjust the tone of all speakers together.
Select whether to adjust Left/Right : Adjust the tone of left and right speakers together.
tones for individual speakers Each : Adjust the tone of each speaker.
or for all speakers.
Adjust EQ q Select the speaker.
Adjust tones for each w Select the adjustment frequency band.
frequency band. Adjust 63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
the speaker selected in • Select the speakers you want to adjust when "Left/Right" or "Each"
"Speaker Selection". is selected.
e Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Curve Copy Yes : Copy.
Copy "Audyssey Flat" No : Do not copy.
(vpage 103) curve from
MultEQ ® XT.
• "Curve Copy" is displayed after Audyssey ® Setup has been performed.
• When you select "Curve Copy" and press
Flat"?" prompt is displayed. Select either "Yes" or "No", and press
ENTER
.
Set Defaults Yes : Reset to the defaults.
The "Graphic EQ" settings No : Do not reset to the defaults.
are returned to the default
When you select "Set Defaults" and press
settings.
ENTER
, the "Reset to the default values?"
prompt is displayed. Select either "Yes" or
"No", and press
Default settings are underlined.
Setting details
ENTER
, the "Copy "Audyssey
ENTER
.
Audio