Subwoofer Level - Denon AVR-2113 Owner's Manual

Tone
Adjust the tonal quality of the sound.
Setting items
Tone Control On : Allow tone adjustment (bass, treble).
Set the tone control function Off : Playback without tone adjustment.
to "On" and "Off".
"Tone Control" can be set when "Dynamic EQ" (vpage 104) is set
to "Off".
NOTE
• "Tone Control" settings are not reflected to ZONE2.
• The tone cannot be adjusted in the "DIRECT" or "PURE DIRECT" mode.
Bass –6dB – +6dB (0dB)
Adjust bass.
"Bass" can be set when the menu "Tone Control" setting is "On".
Treble –6dB – +6dB (0dB)
Adjust treble.
"Treble" can be set when the menu "Tone Control" setting is "On".
Dialogue Level
Sets the output level to clarify the dialogue output from the center channel.
Setting items
Dialogue –12dB – +12dB (0dB)
DVD
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
102

Subwoofer Level

Sets the subwoofer on/off and its output level.
Setting items
Subwoofer On : The subwoofer is used.
Turn subwoofer output on Off : The subwoofer is not used.
and off.
NOTE
This can be set when the sound mode is "DIRECT" or "PURE DIRECT"
(vpage 68)
"LFE+Main".
Subwoofer Level –12dB – +12dB (0dB)
Set the subwoofer output
level.
Restorer
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The "Restorer"
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
Setting items
Mode Off : Do not use "Restorer".
Set the mode for Mode 1 (High) : Optimized mode for compressed sources with very weak
"Restorer". highs (64 kbps and under).
Mode 2 (Middle) : Apply suitable bass and treble boost for all compressed
sources (96 kbps and under).
Mode 3 (Low) : Optimized mode for compressed sources with normal
highs (96 kbps and over).
• This item can be set with analog signals or PCM signal (Sample Rate =
44.1/48 kHz) is input.
• "Restorer" settings are stored for each input source.
• This item default setting for "NETWORK" and "iPod/USB" is "Mode 3
(Low)". All others are set to "Off".
• This cannot be set when the sound mode is set to "DIRECT" or "PURE
DIRECT".
Default settings are underlined.
Setting details
and the "Subwoofer Mode" (vpage
Setting details
Audio
116) is