Control Switches - CORRECT CRAFT Super Air 210 2011 Owner's Manual

• Engine Warning Light - Indicates high engine temperature. If
light illuminates, stop engine and investigate for cause.
• V-Drive Warning Light - Indicates low oil pressure in V-Drive.
If light illuminates when the engine is in gear and above
1200 rpm, stop engine and check V-Drive oil level.

Control Switches

Each electrical circuit on your boat is equipped with a control
switch. The switches have an indicator light for easy ON/OFF
identification. All switches are protected by circuit breakers.
Belly, Port, Starboard Ballast
These buttons fill and drain the ballast tank designated to the
switch. Ballast tanks are an option on most Nautique boats. A full
description of how these buttons function is discussed in Section 4,
Ballast Tank Control Switches.
Underwater Lights
This switch controls the transom underwater lights. DO NOT
operate lights while the boat is out of the water.
Heater Fan (if equipped)
The heater button controls four different heater functions.
Pressing and releasing the "heater" button turns on Low Speed.
Press again for Medium Speed.
Press again for High Speed.
Press again for Off.
The indicator light for this button will illuminate if the heater is
running at any of the three speeds.
Controls and Indicators
4-13