If your boat's gelcoat develops a chalky look over a period of time
due to exposure to sun, there are gelcoat buffing and polishing
compounds available at your Nautique dealer and marine supply
stores. DO NOT use common household scouring pads or
powders.
If you will be keeping your boat in the water for ANY period of time,
we suggest that the wetted surface of the hull be painted with an
epoxy paint formulated for blister protection.
Sudden changes in temperature can affect gelcoat. If you move
your boat from outdoors to a heated area, allow the temperature
change to be gradual. Heat the area after the boat is moved to allow
the boat to warm up slowly as the area is heated. Also, if you move
your boat from a warmer area to a colder one, wait for the outside
temperature to be closer to the warmer area's temperature or allow
the area and the boat to cool down first.
Care of Metal
• Aluminum care
• Stainless care
• Chrome
• Towers
Keep all metal work rinsed and wiped dry. Periodically polish it with
a quality commercially available metal polish to remove substances
such as air-borne pollution and natural body oils from your hands.
Do not use citrus cleaners on stainless steel. For best results on the
towers, use cleaners and waxes suitable for clear coat finishes.
Care of Glass
Your windshield, mirrors and gauge faces all deserve the same
attention as the other parts of your boat. Clean them often with
quality commercially available glass cleaners.
Care and Maintenance
8-13