Rearview Mirror Adjustment - CORRECT CRAFT Super Air 210 2011 Owner's Manual

Section 4

Rearview Mirror Adjustment

The rearview mirror can be positioned on the windshield to
observe a skier and traffic behind you. The mirror should be
lowered when trailering or when using a mooring cover. To
reposition the mirror bracket on the windshield frame, loosen the
three socket head screws and reposition and tighten the screws in
the new location. The center screw (A) should be tightened two
turns, followed by the two outside screws (B) being tightened two
turns. Follow this sequence until all three screws are tight.
The mirror is installed onto the bracket with a friction clamp (C) to
allow mirror adjustment. The friction is controlled by tightening or
loosening the friction clamp bolt and manually positioning the
mirror to the desired view.
C
CORC0253
FRICTION CLAMP
A
B
CORC0254
SOCKET HEAD SCREWS
4-60