Table of Contents
Advertisement
Nautique Sport Sec 4.qxd
Controls and Indicators
Control Switches
Each electrical circuit on your boat is equipped with a control
switch. The switches have an indicator light for easy ON/OFF
identification. All switches are protected by circuit breakers.
Belly, Port, Starboard Ballast
These buttons fill and drain the ballast tank designated to the
switch. Ballast tanks are an option on most Correct Craft boats. A
full description of how these buttons function is discussed in
Section 4, Ballast Tank Control Switches.
12V
12-Volt
This 12-Volt button controls an accessory which has been added to
your boat or provides a circuit to add an accessory. The indicator
light will illuminate when the switch is in the ON position. Limit the
accessory to 10 amps.
Heater Fan (if equipped)
The heater button controls four different heater functions.
Pressing and releasing the "heater" button turns on Low Speed.
Press again for Medium Speed.
Press again for High Speed.
Press again for Off.
The indicator light for this button will illuminate if the heater is
running at any of the three speeds.
Courtesy / Docking Lights
A quick press and release of this button turns on the courtesy lights,
and the indicator light for this button will illuminate. A press and
slight hold turns on the indicator light and the docking lights. Both
the courtesy and docking lights can be turned on at the same time,
but only if the courtesy lights are turned on first.
Sport
7/8/05
4:07 PM
Page 7
4-7
Advertisement
Table of Contents
