Phonak Dynamic SoundField User Manual page 55

11. The MultiTalker Network in school
Practical tips
The MultiTalker Network setting is stored in the
inspiro transmitters. If the inspiro and DynaMic
transmitters have been switched OFF in MultiTalker
Network mode, e. g. before lunch, when switched
back ON again after lunch MultiTalker Network mode
can be selected by simply turning on inspiro and
pressing Continue. In this case, there is no need to
re-initiate the network. All the DynaMic transmitters
will join the network after the 8 second pairing
window.
If you have set up a MultiTalker Network with, for
instance, two inspiro transmitters and a third
person then needs to join the network with inspiro
or DynaMic, you must initiate a new MultiTalker
Network.
54