Phonak Dynamic SoundField User Manual page 17

6. Controls
Constant blue light:
Standard operating mode
The inspiro transmitter and the DigiMaster 5000
loudspeaker are ON, paired and working in normal
operating mode.
Blue blinking light:
Power-saving stand-by mode
If the inspiro transmitter has been switched OFF,
DigiMaster 5000 recognizes this immediately and
switches itself automatically to power-saving stand-by
mode. It switches automatically back to standard
operating mode as soon as the inspiro transmitter is
switched ON. Stand-by mode will also be activated
if the transmitter is out of range.
Constant green light:
Mic muted on inspiro
Check your inspiro and activate the microphone by
pressing the Mic button.
16