If you are using an inspiro that just joined a network,
you can always leave the network by selecting Stop
MultiTalker Network. Your inspiro will then be set to
single teaching mode, but all of the other inspiro
transmitters in the MultiTalker Network will remain in
MultiTalker Network mode.
If you switch OFF one DynaMic, it will be deleted
from your participants list. The MultiTalker Network
will continue with all other DynaMic and inspiro
transmitters.
Should you unintentionally move outside the range of
the MultiTalker Network, you will be alerted by an
alarm. You can then choose to either return inside the
network's operating range (i. e. within 8 m /25 feet of
the initiating inspiro), or leave the network.
53