Phonak Dynamic SoundField User Manual page 52

Make sure you have all the inspiro and DynaMic
transmitters you plan to include in the network in
front of you on the desk. Ensure all these
transmitters are switched OFF.
Take the main teacher's or main speaker's inspiro
and switch it ON. In this inspiro, select MultiTalker
Network and then Set up network. This inspiro is
known as the "initiator".
Read the information on the LCD display and then
press the Start soft key.
Next, switch ON all of the other inspiro and DynaMic
transmitters.
A list of the inspiro and DynaMic transmitters that
have joined the network should now be displayed on
the initiating inspiro. If all of the transmitters are
listed, press the Continue soft key.
You have successfully created a MultiTalker Network!
All inspiro and DynaMic transmitters are paired by the
initiator inspiro.
Begin talking as usual.
51