Dynamic Soundfield Pairing Instructions - Phonak Dynamic SoundField User Manual

14. Dynamic SoundField pairing
instructions
In case you need to re-pair the inspiro transmitter
with the DigiMaster 5000 loudspeaker, proceed as
follows:
A Take inspiro and make sure it is charged (see
page 11). Switch ON inspiro. If the battery symbol
appears, press the two buttons shown (below-left)
simultaneously.
06.07.10
Vol Down
Release the two buttons then Press 'OK' .
60
01:57pm
Vol Up
06.07.10 01:57pm
Vol Down Vol Up