How To Use A Multitalker Network - Phonak Dynamic SoundField User Manual

11. The MultiTalker Network in school

11.2 How to use a MultiTalker Network

The inspiro that set-up (initiated) the network has
first priority; all other transmitters (inspiro/DynaMic)
have second priority.
The teacher with first priority can interrupt any teacher
or student that has second priority; a second priority
teacher or student can only take over during the speech
pauses of the first priority teacher.
No user action is required; if the first priority inspiro
does not detect speech, any second priority teacher
or student can "get the microphone" just by starting
to talk.
Only one voice is transmitted at a time.
Leaving a MultiTalker Network
The MultiTalker Network cannot exist without the
presence of the initiating inspiro in the network. If you
decide to end the MultiTalker Network, the entire
network will cease and all of the inspiro and DynaMic
transmitters will activate their respective alarms.
52