Getting Started - Phonak Dynamic SoundField User Manual

7. Getting Started

If Dynamic SoundField has been installed according to
the separate installation instructions, the DigiMaster
5000 loudspeaker has been either mounted on the wall
or on the stand, and the loudspeaker is connected to
the mains. In addition, your inspiro has already been
paired with the DigiMaster 5000 loudspeaker.
The pairing information is stored in the inspiro and
in the DigiMaster 5000 unit. The pairing information
remains even if the loudspeaker is removed from
the mains or the inspiro is switched off, or the battery
from the inspiro is removed.
The pairing needs to be re-done after a firmware upgrade
of the DigiMaster 5000, the inspiro or both. Please
check chapter 14 in this document or in the separate
installation instructions for pairing advice.
18