Getting Started - Phonak Roger Demo Manual

Optional equipment
•
Roger MyLink demo instrument with headphones for significant others
Place
•
Round or rectangular table, size approx.. 1 meter / 3 feet in diameter/length
Preparation
1. Make sure the equipment is well charged and it is switched on
2. Place the noise speaker approximately 2 meter / 6 feet away from the center of the table and calibrate the noise level to
around 70 dBA at the center of the table.
3. Have your smartphone ready with a short music movie
4. Plug the audio cable into your smartphone and into Roger Select and play the music movie
5. On the TV, make sure a news program is available
6. Place the docking station next to the TV screen and connect it to the power outlet and the TV's digital output
Optional: Pair Roger Select / Roger Pen with your smartphone using Bluetooth® wireless technology
Tips
• PRACTICE – PRACTICE – PRACTICE
The more confident and comfortable you are with your demonstration, the more likely you will be successful.
You should also wear a Roger MyLink with headphones to verify the sound during the whole demo and pace your
instructions.
Choose the right receiver for your client
Your client has:
Hearing device with
RogerDirect™
(e.g. Phonak Audéo™ M-
312)
Hearing device with T-Coil
Hearing aid plus streaming
device with euro plug
(e.g. ComPilot II, GN
ReSound MultiMic)

Getting started

1. Switch on the equipment
2. Let the participants sit around the table
3. Make sure the hearing device is switched on and in the correct program (see table above)
4. Connect Roger Select with the Roger MyLink(s)
Note: Hold Roger Select close to Roger MyLink and press Connect button
Optional: Give the Roger MyLink with headphones to significant others and make sure everybody can hear the music
Receiver to Steps before demo
choose
2 Roger X Install Roger X into both hearing
devices using Roger Installer
Roger MyLink Let client wear the Roger MyLink
around the neck and make sure
the hearing device is switched to
T-Coil program.
1 Roger X Plug Roger X into streaming
device and make sure hearing aid
is in streaming program
Steps after demo
Uninstall Roger from both hearing
devices using Roger Installer back
into Roger X
Take Roger MyLink back and
restart hearing device
Unplug Roger X from the streamer
and restart the hearing device
Phonak Roger Select™ 2