Setup And Operation; Inserting The Remote Control Batteries - Digital Projection E-Vision Series User Manual

DLP Projector—User's Manual

Inserting the Remote Control Batteries

1.
Remove the battery compartment
cover by sliding the cover in the
direction of the arrow.
2.
Insert the battery with the positive
side facing up.
3.
Replace the cover.
Caution:
1. Only use AA batteries (Alkaline batteries are recommended).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the batteries when not using the projector for prolonged periods.
S
ETUP AND
— 10 —
O
PERATION