Settings 2 Menu - Digital Projection E-Vision Series User Manual

DLP Projector—User's Manual

Settings 2 Menu

Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu.
I
TEM
Auto Source
No Singal Power
Off (min.)
Auto Power On
Lamp Mode
Reset All
Status
Advanced 1
Advanced 2
Press the cursor ◄► button to enter and enable or disable automatic source
detection.
Press the cursor ◄► button to enter and enable or disable automatic shutdown of
lamp when no signal.
Press the cursor ◄► button to enter and enable or disable automatic power On when
AC power is supplied.
Press the cursor ◄► button to enter and select the lamp mode for higher brightness
or lower brightness to save lamp life.
Press (Enter) / ► to reset all settings to default values.
Press (Enter) / ► to enter the Status menu. See page 35 for more information on
Status.
Press (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on
page 36.
Press (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on
page 48.
D
ESCRIPTION
— 34 —