DLP Projector—User's Manual
Tilt Up/Down caution
When projector detect angle is over spec, popup caution message.
The model with Standard lamp module
The model with Standard lamp module can be used projection angle as shown below.
If Projector projection angle exceeds the drawing shown and don't use tilt lamp module. Showing caution
message for 5sec and then disappear, projector remain on. (every time when projector on
can be disable see Advanced 1 Feature on page 36
15
The model with Tilt lamp module
The model with Tilt lamp module can be used projection angle as shown below.
If Projector projection angle exceeds the drawing shown and don't use standard lamp module. Showing
caution message for 5sec and then disappear, projector remain on. (every time when projector on
function can be disable see Advanced 1 Feature on page 36
15
Warning:
Your operation might cause lamp defect and life decay. If used incorrect lamp module
M
AINTENANCE AND
)
Standard Lamp
)
Tilt Lamp
— 50 —
S
ECURITY
; This function
15
; This
15