Bottom View - Digital Projection E-Vision Series User Manual

DLP Projector—User's Manual

Bottom view

I L
TEM
1.
Tilt adjustor
2.
Ceiling support holes
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum
screw depth of 6 mm (0.23 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling
mount load capacity must exceed the weight of the installed equipment, and as an additional
precaution be capable of withstanding three times the weight of the equipment (not less than
5.15 kg) over a period of 60 seconds.
ABEL
Rotate adjuster lever to adjust angle position.
Contact your dealer for information on mounting the projector on a
ceiling
D
ESCRIPTION
— 6 —
S :
EE PAGE
17