On-Screen Display (Osd) Menu Settings; Osd Menu Controls; Navigating The Osd - Digital Projection E-Vision Series User Manual

DLP Projector—User's Manual
O

OSD Menu Controls

The projector has an OSD that lets you make image adjustments and change various settings.

Navigating the OSD

You can use the remote control cursor buttons or the buttons on the top of the projector to
navigate and make changes to the OSD. The following illustration shows the corresponding
buttons on the projector.
1
1
3
7
1. To enter the OSD, press the MENU
button.
2. There are three menus. Press the cursor
◄► button to move through the menus.
3. Press the cursor ▲▼ button to move up
and don in a menu.
4. Press ◄► to change values for settings.
5. Press MENU to close the OSD or leave
a submenu.
Note:
Depending on the video source, not all items in the OSD are available. For example, the
Horizontal/Vertical Position items in the Computer menu can only be modified when
connected to a PC. Items that are not available cannot be accessed and are grayed out.
-S D
N CREEN
5
6
4
(OSD) M
ISPLAY
3
7
2
6
— 22 —
S
ENU ETTINGS
1
4
2
5
1