Digital Projection E-Vision Series User Manual page 55

DLP Projector—User's Manual
Input the command format like the below:
telnet ttt.xxx.yyy.zzz 23 ("Enter" key pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
If Telnet-Connection ready, and user can have RS232 command input, then "Enter" key
pressed, the RS232 command will be workable.
How to have TELNET enabled in Windows VISTA / 7
By default installation for Windows VISTA, "TELNET" function is not included. But end-user
can have it by way of "Turn Windows features On or Off" to be enabled.
Open "Control Panel" in Windows VISTA
Open "Programs"
— 46 —