LinkPoint 3000/AIO Reference Manual page 44

DOWNLOAD PROCEDURES
Display Message
Enter password:
[? ] [? ] [? ]
(optional)
Download Set port
[? ] [? ] [? ]
Select download port
Modem
RS232
[? ] [? ] [? ]
RS232 setup
Baud Parity
[? ] [? ] [? ]
Current baud: 19200
1200 2400 9600
[? ] [? ] [? ]
RS232 setup
Baud Parity
[? ] [? ] [? ]
Current parity: None
Even None Odd
[? ] [? ] [? ]
Download Set port
[? ] [? ] [? ]
Enter Appl. ID.
L3FRR31
[? ] [? ] [? ]
Enter Terminal ID.
[? ] [? ] [? ]
Display Message
© 2002 LinkPoint® International, Inc.
Operator Action
If prompted, key in the password and press [ENTER]. The
password may be obtained through the bank/ISO or
FDRMS Help Desk.
Press the right [? ] key to select SET PORT.
Press the right [? ] key to select RS232.
Press the left [? ] key to select BAUD.
Select the correct baud rate, press [CLEAR] to accept the
default of 19200. Press the [? ] key below your choice and
press [CLEAR] or press the [#] key to see other options.
Press the right [? ] key to select PARITY.
Select the correct parity (default is None). Press the [? ]
key below your choice and press [CLEAR] three times.
Press the left [? ] key to select DOWNLOAD.
Key in the application ID and press [ENTER].
Key in the terminal ID and press [ENTER].
Operator Action
38 L3FRR31 Reference Manual