LinkPoint 3000/AIO Reference Manual page 25

Citizen printers. THERE IS USUALLY NO NEED TO CHANGE THESE SETTINGS.
Standard Default setting: Baud=9600, Parity=Even.
Display Message
READY XXX
JAN-03-00 MON 12:00P
[? ] [? ] [? ]
CLEAR_to_resume
_ Time Load Setup
[? ] [? ] [? ]
Setup
Ports Model Test
[? ] [? ] [? ]
Port_setup
Printer RS232 PINpad
[? ] [? ] [? ]
Printer_setup
Baud Parity
[? ] [? ] [? ]
Current baud: 9600
1200 2400 9600
[? ] [? ] [? ]
Printer setup
Baud Parity
[? ] [? ] [? ]
Current parity: Even
Even None Odd
[? ] [? ] [? ]
© 2002 LinkPoint® International, Inc.
BOOT MODE FUNCTIONS
Operator Action
Hold down the [ALPHA] key and press [7] [1] [3] [9].
Release the [ALPHA] key to enter the boot mode.
Press the right [? ] key to select SETUP.
Press the left [? ] key to select PORTS.
Press the left [? ] key to select PRINTER.
Press the left [? ] key to select BAUD to change the
printer baud rate.
Select the correct baud rate. Press the [ ? ] key below
your choice to select it and press [CLEAR].
Press the right [? ] key to select PARITY.
Select the correct parity. Press the [? ] key below your
choice to select it and press [CLEAR] five times to reboot
the terminal.
19 L3FRR31 Reference Manual