LinkPoint 3000/AIO Reference Manual page 329

APPENDIX A—PROMPTS, ERROR MESSAGES AND
NO TOTALS FOUND
PICK UP CARD
PRINTER REQUIRED
FOR DEBIT CARD
SALES
PROMPTS FILE
READY XXX
RECEIVING...
SWIPE CARD
TASK ERR #141
TASK ERR #146
UNREADABLE CARD
WAITING FOR LINE
WAITING FOR PIN
© 2002 LinkPoint® International, Inc.
No transactions were found for the card type selected.
The host computer has detected that the card used is no
longer valid or it may be lost or stolen.
This message prompts when the [ATM/DEBIT] key is
pressed but a printer is not connected/enabled. A printer
must be connected, enabled, and powered on to perform
an ATM/debit sale.
Displays during initialization of the terminal after a full or a
partial download.
The line 1 default idle prompt displays the number of
transactions left in the batch.
This message displays when the terminal is receiving a
response from the host computer via modem.
User attempted (1) to key in an ATM/debit sale; ATM/debit
sales must be swiped or (2) to key in a transaction when
the terminal is downloaded with the keyed parameter
disabled.
Message displays when a close function was attempted
on a batch with no transactions.
Message displays when there are no transactions in the
current batch.
The magnetic stripe of the swiped card may be damaged
or the card reader may be obstructed or otherwise
requires cleaning.
Message displays when terminal is trying to access a
valid phone line to complete a transaction. Confirm that
the terminal is connected to the phone line properly.
Prompts on the PIN pad while it waits for the customer to
enter his/her PIN number.
323
TROUBLESHOOTING
L3FRR31 Reference Manual