Attaching Pre-Strung Beads - Bernina 1200DA Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Following the instructions in the Owner's manual thread the serger for a narrow 3-thread flatlock stitch
using the right needle.
• Adjust as indicated on the LCD screen. Fine tune as needed.
• Set stitch length to 4mm.
• Attach the Multi-Purpose Foot (no guide), following the directions in the instruction leaflet for the
Multi-Purpose Foot with Guide.
• Optional: Attach the Right Seam Guide. Move the Right Seam Guide halfway between the needle and
the stitch finger.
• Lay the pre-strung beads in the groove on the top of the foot, threading them under the back groove
(see instruction leaflet for the Multi-purpose Attachment with Guide). Turn the handwheel to encase
the first beads into the thread chain.
• Fold the fabric in half to 2" x 6" and place the fabric under the foot with the fold halfway between the
needle and the stitch finger or against the right seam guide.
• Slowly flatlock the beads to the folded fabric.
• Gently pull the fabric flat.
• Mount the sample.
BERNINA
M Y
ASTERING OUR
BERNINA
MULTI-PURPOSE FOOT

Attaching Pre-Strung Beads

Fabric:
Needle:
Thread:
Presser Foot:
Stitch:
6/01/02
®
®
Medium weight, 4" x 6"
10" of plastic, pre-strung beads (4mm)
80/12 Universal
3 cones of serger thread
Multi-Purpose Foot (optional accessory)
#6 (narrow 3-thread flatlock)
1200DA/1300DC
1200DA/1300DC/73