Narrow (2.5Mm) Coverstitch; Attaching Lace - Bernina 1200DA Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Convert the serger from overlock to coverstitch following the instructions in the Owner's manual.
• Insert the left and right needles.
• Thread the serger for a narrow 3-thread coverstitch.
• Adjust as indicated on the LCD screen. Fine tune as needed.
• Stabilize the fabric and lace using spray starch or sizing.
• Position lace on right side of fabric, aligning scalloped lace edge with right edge of fabric.
• Place fabric and lace under the needles, aligning the lace header with the inside left floating toe of
the presser foot.
• Coverstitch the lace to the fabric.
• Turn the handwheel toward you to bring the needle to the lowest position; turn the handwheel
away from you to raise the needle to the highest position.
• Lift the presser foot and remove the fabric.
• Trim the fabric from beneath the lace and mount the sample.
BERNINA
M Y
ASTERING OUR

Narrow (2.5mm) Coverstitch

Attaching Lace

Fabric: Medium weight woven cotton, 3" x 6"
8" of 1" wide lace edging
Needle: 80/12 Universal
Thread: 3 cones of serger thread
Presser Foot: Coverstitch
Stitch: #24 (3-thread narrow coverstitch)
6/01/02
®
BERNINA
®
1300DC
1300DC/83