Wrapped Edge - Bernina 1200DA Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
Fabric:
Needle:
Thread:
Presser Foot:
Stitch:
• Owner's manual pg.___
• Attach the 2-thread adapter to the upper looper.
• Following the instructions in the Owner's manual thread the serger for a 2-thread wrapped edge
using Jeans Stitch
• Adjust as indicated on the LCD screen. Fine tune as needed.
• Place the fabric under the presser foot and serge along one edge; adjust the differential feed
if needed.
• If the Jeans Stitch
tension. If the thread still does not wrap, remove the Jeans Stitch
thread guide and try again.
• Wrap-stitch the remaining three edges of the fabric.
• Use seam sealant to seal the stitching at the corners. When the sealant is dry, trim the thread tails.
• Return stitch length and thread tension dials to normal.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
BERNINA

WRAPPED EDGE

Heavy wool or polar fleece, 5" x 6"
80/12 Stretch
1 cone of serger thread
1 cone of Jeans Stitch
Standard
#9 (wide wrapped edge) or #10 (narrow wrapped edge)
® thread in the lower looper.
®
does not wrap, the thread tension may be too tight. Reduce the looper thread
6/01/02
®
®
1200DA/1300DC
®
® thread from the uppermost
1200DA/1300DC/68