Two Thread Rolled Hem - Bernina 1200DA Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Attach the 2-thread adapter to the upper looper.
• Following the instructions in the Owner's manual thread the serger for a 2-thread rolled edge.
• Adjust as indicated on the LCD screen. Fine tune as needed.
• Pull the rolled hem dial towards you.
• Adjust the stitch length to 1.75mm.
• Set cutting width at 1mm.
• Place the fabric under the presser foot and serge along one 6" edge, trimming about
raw edge.
• Return stitch length and thread tension dials to normal.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
BERNINA

TWO THREAD ROLLED HEM

Fabric:
Needle:
Thread:
Presser Foot:
Stitch:
6/01/02
®
®
Batiste, 3" x 6"
70/10 Sharp or Microtex
2 cones of lightweight serger thread
Standard
#13 (2-thread rolled edge)
1200DA/1300DC
1 / " from the
8
1200DA/1300DC/67