Attaching Ribbing - Bernina 1200DA Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Thread the serger for a 4-thread balanced overlock stitch using Woolly Nylon in both loopers.
• Adjust as indicated on the LCD screen. Fine tune as needed.
• Cut a mock neckline on the corner of the fleece (quarter circle).
• Fold the ribbing in half (wrong sides together) to 1¾" x 6".
• Matching raw edges, place the ribbing to the neckline on the right side of the fleece.
• Serge the ribbing to the fleece, stretching the ribbing to meet the fleece neckline.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
BERNINA

ATTACHING RIBBING

Fabric:
Needle:
Thread:
Presser Foot:
Stitch:
6/01/02
®
®
Sweatshirt fleece, 4" x 6"
Ribbing, 6" (width) x 2½" (length)
11/75 Stretch or Ballpoint
2 cones of serger thread (needles)
2 cones of Woolly Nylon (loopers)
Standard
#1 (4-thread overlock stitch)
1200DA/1300DC
1200DA/1300DC/24