Multi-Purpose Foot - With The Gathering Attachment - Bernina 1200DA Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
Fabric:
Needle:
Thread:
Presser Foot:
Stitch:
• Owner's manual pg.___
• Following the instructions in the Owner's manual thread the serger for a 4-thread overlock stitch using
both needles.
• Adjust as indicated on the LCD screen. Fine tune as needed.
• Adjust differential feed to 2.
• Attach the Multi-Purpose Foot (no guide), following the directions in the instruction manual for the
Multi-Purpose Foot with Guide.
• Attach the Gathering Attachment following the directions in the instruction leaflet for the Gathering
Attachment.
• Wrap the bias strip around the cord and place the wrapped cord in the groove under the foot.
• Take 2 or 3 stitches into the fabric and lower the needles into the fabric.
• Place the 3" x 18" fabric under the Gathering Attachment and next to the needles.
• Serge, covering the cord, gathering the fabric strip and seaming all layers together in one operation.
• Mount the sample on the following page.
BERNINA
M Y
ASTERING OUR
MULTI-PURPOSE FOOT
With The Gathering Attachment
Medium weight cotton bias strip, 2" x 8"
Medium weight cotton, 3" x 8"
12" of
80/12 Stretch
4 cones of serger thread
Multi-Purpose Foot with Guide (optional accessory)
Gathering Attachment (optional accessory)
#1 (4-thread overlock)
6/01/02
®
BERNINA
3
/ " cotton cording
8
®
1200DA/1300DC
1200DA/1300DC/71