Multi-purpose Foot
Optional Accessories
Piping
The Multi-purpose foot is available at the BERNINA specialized store.
⦁
Attach the Multi-purpose foot.
⦁
4- or 3-thread overlock.
⦁
Piping (corded bias fold tape).
⦁
Place folded piping between fabric layers.
⦁
Sewing on braid or ribbon for straight seams.
⦁
2- or 3-thread overlock.
Pearls along the fabric edge
Up to 4mm pearls on a string
⦁
Attach the Multi-purpose foot.
⦁
3- or 2-thread overlock right needle
̶ Stitch length up to 4
̶ Adjust the presser foot pressure.
̶ Adjust the differential feed to 0.7 -1
̶ Test run
⦁
Place the pearls in the channel on the foot with 3 cm of pearls extending behind the
foot.
⦁
Make one stitch via the handwheel to secure the pearls.
⦁
Line up the fabric edge to extend slightly over the foot guide and along the pearls.
⦁
Sew pearls on the edge of the fabric.
Pearls along a fabric fold.
⦁
Attach the Multi-purpose foot.
⦁
3- or 2-thread flatlock right needle
̶ Stitch length up to 4
̶ Deactivating the knife
̶ Adjust the thread tension.
̶ Test run
⦁
Place the pearls in the channel on the foot with 3 cm of pearls extending behind the
foot.
⦁
Make one stitch via the handwheel to secure the pearls.
⦁
Line up the fold to extend slightly over the foot guide.
⦁
Open the flatlock.
41