Multi-Purpose Foot With Guide - Bernina Serger 1150MDA Owner's Workbook

Multi-Purpose Foot with Guide -

Corded Piping
Fabric ..........................................mediumweight cotton bias strip, 2" x 8"
Other .................................................... 12" length of
Needle ............................................................................. 80/12 Universal
Thread ................................................................... 4 cones serger thread
Presser Foot ............................................ Multi-Purpose Foot with Guide
Stitch ............................................................................ 4-thread overlock
Following the instructions in your owner's manual, thread the serger
for a 4-thread overlock stitch using both needles.
Adjust all settings for a balanced stitch.
Set stitch length to 3.5mm.
Attach the Multi-Purpose Foot and Guide following the directions in the
instruction manual for the Multi-Purpose Foot with Guide.
Note: 700D and 800DL also need the Attachment Base.
Insert the filler cord into the guide.
Wrap the bias strip around the cord and place the wrapped cord in the
groove under the foot.
Serge the covered cord.
Mount the sample.
BERNINA
M Y
ASTERING OUR
Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA
Sergers
®
S 6/2006
ERGERS
©2006 BERNINA
3
/ " cotton filler cord
8
® of America, Inc.
Mastering
Your
BERNINA
®
Notes
108
®
Dealers