Unpacking And Placement; Unpacking Your Amplifier; Placement; Ventilation - Classe Audio Sigma Series Owner's Manual

Five-channel amplifier
Hide thumbs Also See for Sigma Series:
Table of Contents

Advertisement

unpacking your amplifier Carefully unpack your power amplifier according to the supplied instructions,
Important!
placement Many installations will utilize an equipment rack, although a shelf, a cabinet or
ventilation Your Classé power amplifier generates a certain amount of heat in the course of
custom installations Drawings are included in this manual to facilitate special installations and
6

Unpacking and Placement

and remove all accessories from the carton. Please take care when lifting the
amplifier, as it is heavier than it may appear.
Keep all packing materials for future transport of your
Classé amplifier. Shipping your new component in
anything other than its purpose-designed packing material
may result in damage that is not covered by the warranty.
the floor near the speaker(s) are acceptable alternatives. In any case, take care to
position it well away from source components and preamp/processors, which
may be sensitive to the amplifier's electromagnetic fields.
Note that adequate clearance for the AC cord and connecting cables
must be left behind the amplifier. We suggest leaving six inches (15 cm)
of free space behind your power amplifier to allow all cables sufficient
room to bend without crimping or undue strain.
normal operation. Avoid placement on soft surfaces that would restrict airflow
around the unit (such as plush carpeting).
custom cabinetry (see the section Dimensions). Contact your Classé dealer for
more information.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amp5 series

Table of Contents