Canon imageRunner 2020 Facsimile Manual page 161

❑
ABC DEF
Enter the Memory Lock password (up to seven digits) using the numeric keys
1 2 3
➞ press [OK].
GHI JKL MNO
4 5 5 6
PQRS TUV WXYZ
7 8 9
Tone SYMBOLS
0 #
OK
NOTE
Storing a password is an optional function. If you do not want to store the
password, you can pass this step.
IMPORTANT
Make sure not to forget the Memory Lock password. Write it down and store it in a
safe place.
❑
Press[
OK
❑
Press [
<OFF>:
OK
<ON>:
] until <REPORT PRINT> appears ➞ press [OK].
] or [
] to select <ON> or <OFF> ➞ press [OK].
] or [
The RX Reports are not printed when the machine is in the Memory
Lock mode. When you turn off the Memory Lock mode, the machine
prints the RX reports and any documents that have been stored. This
is the factory default setting.
The RX reports are printed when the machine is in the Memory Lock
mode.
Communications Settings
7
7-5