Checking Transaction Results - Canon imageRunner 2020 Facsimile Manual

Checking Transaction Results

Follow the procedure below to check the detailed information about a send job,
such as the document set time and number of pages. This feature is convenient
when you want to check the status of a transaction without printing an Activity
Management Report.
NOTE
If the <CHECKING THE LOG> in the <SYSTEM SETTINGS> menu is set to <OFF>, the
display for checking the <RX/TX LOG> does not appear and you cannot check the <RX/
TX LOG>. For more information on this setting, see Chapter 3, "Checking and Canceling
a Job," in the Reference Guide.
1
System Monitor
Press [System Monitor].
2
Press [
press [OK].
OK
3
Press [
receiving results.
Stop
4
Press [Stop] to return to the Standby display.
] until <TX/RX LOG> appears ➞
] or [
] or [ ] to scroll through the sending or

Checking Transaction Results

3
3-21