Canon imageRunner 2020 Facsimile Manual page 99

Start
4
Specify the destination ➞ press [Start].
For instructions on specifying the destination, see "Dialing Methods," on p. 2-2.
If you want to specify other send settings, set them before specifying the
destination.
If the original is placed on the platen glass, follow the instructions that appear on
the LCD display ➞ press
(Start) once for each original. When scanning is
complete, press [OK].
Scanning starts.
3
The scanned data is sent to the destination once scanning is complete.
NOTE
To cancel all settings and return the machine to the Standby mode, press
(Reset).
3-10 Adjusting the Scan Settings