Setting The Date Of The System - AERMEC MULTI CONTROL Booklet

• Setting the date of the system:

System date
13/03/11
Monday
ESC
D
System date
13/03/11
Monday
The second window of the DATE TIME MENU allows the
user to set the date of the system; this window displays the
following information:
- Current date set in the system (
for the system; all the timers of the MULTI CONTROL panel
will be managed by using the date set in this parameter.
A
From this window it is possible to:
B
(1) Set system date: pressing the key
modifi cation mode and the DAY will be highlighted; at this point,
C
the procedure for setting the system date will be:
a) Press the key A to increase the day or the key
it.
C
b) Press the key to confi rm the selection and pass on to set
the month.
c) Press the key A to increase the selected value or the key
to decrease it.
d) Press the key C to confi rm the selection and pass on to set
the year.
e) Press the key A to increase the selected value or the key
to decrease it.
f) Press the key C to confi rm the selection and pass on to set the
day of the week.
g) Press the key A to increase the selected value or the key
to decrease it.
h) Press the key C
1
modifi cation mode.
2
(2) Go back to the previous window:
to go back to the previous window of this menu, press the
key A .
(3) Exit this window:
press the key D to return to the selection of the main menus.
1 ): indicates the date set
C will allow you to enter
B to decrease
to confi rm the selection and exit date
4598010_00
B
B
B
25
GB