Scanning With Event Forwarding - Xerox 2400 Series User Manual

Scanning

Scanning with Event Forwarding

70
If you want to specify an application to use for scanning at the start
of the process, you can use event forwarding. The scanner will
feed in the first page, but will then stop until you select the
application to use. After you select the application, its interface will
open and you can use it to continue with the scanning.
To scan with event forwarding:
1. Open the One Touch Properties window.
2. Click the tab of the button to use for the event forwarding.
If the button does not have Still Image Client as a Destination
Application, click the Options tab, select Sti event
forwarding, then click Apply.
3. Select Still Image Client as the Destination Application.
Note that you cannot choose a page format for this option
because the actual Destination Application is not selected until
after you press the scanner button.
4. Choose a Scan Configuration.
5. Click OK.
The One Touch Properties window closes.
Xerox Scanner User's Guide