Scanning With Event Forwarding - Xerox XDM5205DWU - DocuMate 520 User Manual

Scanning with Event Forwarding

DocuMate 520 Scanner User's Guide
If you want to specify an application to use for scanning at the start
of the process, you can use event forwarding. The scanner will
feed in the first page, but will then stop until you select the
application to use. After you select the application, its interface will
open and you can use it to continue with the scanning.
To scan with event forwarding:
1. Open the One Touch Properties window.
2. Click the button that you want to use for event forwarding.
If none of the buttons have Still Image Client as a Destination
Application, click the Options tab, select Sti event
forwarding, then click Apply and click the tab of the button
again.
3. Select Still Image Client as the Destination Application.
Note that you cannot choose a format for this option because
the actual Destination Application is not selected until after the
scanner feeds in the first page of your document.
4. Choose a Scan Configuration.
5. Click OK.
The One Touch Properties window closes.
Scanning
77