Xerox 2400 Series User Manual page 74

Scanning
NOTE: When scanning items to burn to a CD, you should
always use one of the factory-set default configurations, or a
custom configuration specifically set up for CD burning. The
default configurations are already set up to send the scanned
images to the proper storage location where the Windows XP
and Windows Vista CD writing wizard can find the files to burn to
the CD. Likewise, when you create a custom configuration for
CD burning, the One Touch software will automatically make
sure the storage location is correct.
To create a custom configuration for CD burning, select Burn to
CD as the Destination Application, then click the New button and
create the new configuration. You won't need to select a storage
location because it will be correctly preset for you by the One
Touch software.
Note however, that if you have created other custom
configurations with different storage locations (for example, see
"Scanning to Multiple Archive Folders" on page 75), do not use
them for the Burn to CD Destination Application. Otherwise, the
Windows XP or Windows Vista CD writing wizards will not be
able to find the images to burn onto the CD.
Xerox Scanner User's Guide 69