Scanning With Event Forwarding (Sti) - Xerox XCARD-SCAN User Manual

Scanning with Event Forwarding (STI)

If you want to specify an application to use for scanning at the start of the process, you can use event
forwarding.
To scan with event forwarding:
1. Open the One Touch Properties window.
2. Select Still Image Client as the Destination Application.
You cannot choose a page format for this option because the actual Destination Application is not
selected until after you press the scanner button.
3. Choose a Scan Configuration.
4. Click OK.
5. Place a document in the paper feed slot to start scanning.
A dialog box opens for you to select the application to use for scanning.
6. Select the application you want in the box and click OK.
Now the application you selected opens and you can continue scanning using the application's
interface.
Xerox Card Scanner 200 User's Guide
Scanning
49