Xerox 2400 Series User Manual page 110

Xerox Scanner User's Guide
4. Click Yes then click Next.
The next window offers you the option to run hardware
diagnostics.
5. Click Yes (recommended) then click Next.
The next window is for checking the connection between your
scanner and the computer.
6. Click Next.
After the Setup Wizard checks the connections, the next
window is displayed. It has a series of setup options, but only
the Basic scan test is necessary because your scanner was
already tested and calibrated when you installed the One
Touch 4.0 software.
Scanning from the TWAIN Interface
105