Configure Before Scan - Xerox 2400 Series User Manual

Scanning

Configure Before Scan

You can set up the scanner so that, when you press a button or
click it on the Button Panel, a different scanning interface opens
before the scanning starts. You can then use the interface to select
new settings or scanning options. To set up the scanner for this
capability, you select Configure Before Scan as its Scan Setting.
Choosing Configure Before Scan simply opens either the TWAIN
or WIA scanning interface when you press or click a button. You
can then use the interface to change the Resolution, Scan Mode,
and other settings. When you scan, the scanned image will still be
sent as the file type and to the same Destination Application
already selected in the One Touch Properties window for that
button. Please see "Scanning from the TWAIN Interface" on
page 83 for detailed instructions about scanning with the TWAIN
Interface or "Scanning from the Windows Image Acquisition
Interface" on page 109 for detailed instructions about scanning with
the WIA Interface.
The option Configure Before Scan can be used when you want to
scan multiple pages and have them appear in one file. The One
Touch file formats TIFF and PDF support multiple page files.
TIP (Model 4800TA Only): If you will be using your scanner for
lots of transparency scans, set up one of the scanner buttons to
Configure Before Scan and select the TWAIN option. Then, the
TWAIN interface opens right away for transparency scanning.
To set Configure Before Scan:
1. Open the One Touch Properties window.
2. Click the tab of the button that you want to set to configure
before scanning.
Xerox Scanner User's Guide 63