Installation; Before You Begin - Xerox 2400 Series User Manual

Before You Begin

Xerox Scanner User's Guide

Installation

Installation is a quick, three-step process:
1. Assemble the scanner
2. Install the software
3. Connect and power on the scanner
Please make sure of the following before you begin installation:
• The information in this guide may cover software not
provided with the scanner you purchased. Please
disregard any information about the software not
applicable to your scanner. Visit our web site at
www.xeroxscanners.com for the latest software updates
for your Xerox scanner.
• If your computer has AntiVirus or AntiSpyware software
running, you may encounter alerts or messages during
installation asking you to allow the installation to proceed.
Although the messages will differ based on the software
your computer is running, in each case you should allow
the installation to proceed if that option is available.
Alternatively, you can turn off the AntiVirus or
AntiSpyware software before installing your scanner, but if
you do, make sure to turn it back on again when
installation is finished.
• If you already have a scanner connected to your computer,
it is recommended that you remove that scanner's driver
program prior to installing your Xerox scanner. While in
some cases you can configure your computer to have
another manufacturer's scanner operational on your
computer in conjunction with the Xerox scanner, we do not
recommend this configuration as you may lose some of
the driver functionality on one, or both of the units. You
can remove these programs from the Windows Add/
Remove programs list. Please refer to the user manual
provided with your other scanner hardware for
instructions about removing the driver and software for
that unit.
• If your computer is running Windows Vista, you may see
the Vista User Access Control screen asking you to
confirm system changes. Click the Continue button to
allow the installation to proceed.
Installation
5