Xerox 2400 Series User Manual page 8

Welcome
Scanner lid—Protects the document from light and contamination.
Transparency light source—(Model 4800TA only) The light
source for scanning 35mm slides and negatives. Shines light down
through 35mm slide or negative transparencies, through the glass
and onto the scanning sensors in the body of the scanner.
Glass—Items are placed face down aligned at the arrow symbol at
the upper left corner.
Reference marks—Marks on the border of the glass show where
to align various paper sizes.
Locking tab—Protects the scanner's scan head by holding it
securely in position. The locking tab, located on the underside of
the scanner, must be unlocked before scanning. The scanner will
not scan when locked.
One Touch button panel—Scans to the appropriate application
indicated by the button. For example, pressing the Email button
scans the document, then opens your Email program with the
image of the scanned document as an attachment to a new
message ready for you to address and send.
Status light—Shows the scanner's status. Green light: scanner is
ready to scan. Orange light: scanner is busy.
Option port—(Model 4800TA only) Connects the TPA cable to the
scanner. The cable must be attached for the transparency light
source to operate.
USB port—Connects the scanner to the computer. Models 4800
and 4800TA can connect to either a USB 1.1 or a USB 2.0 port.
Model 2400 connects to a USB 1.1 port only.
Power jack—Connects the power adaptor to the scanner.
TPA (Transparency Adapter) cable—(Model 4800TA only)
Supplies power from the scanner body to the transparency light
source.
NOTE: The scanner does not have an on/off switch. The
scanner is ready to scan as soon as its software is finished
loading onto your computer
Xerox Scanner User's Guide 3