A L A R M R E C O R D I N G S E T U; P A N I C R E C O R D I N G S E T U - Ganz DIGIMASTER DR8HV Instruction Manual

RECORD SETUP
ALARM RECORDING SETUP
This menu screen allows the user to configure alarm-activated recording.
There are 2 sections to this menu:
SIZE / FPS / QUALITY: Recording settings for each channel can be defined across a 24-hour period, in blocks
ACTIVATION: This section determines at what times the DVR will record and whether it is set to continuous or motion.
NOTE: Please refer to the instructions for the 'CONTINUOUS / MOTION RECORDING' menu for details on setting
up the 'SIZE / FPS / QUALITY' and 'ACTIVATION' tabs within the 'ALARM RECORDING' menu.
Alarm-activated recording can be used in conjunction with the 'CONTINUOUS / MOTION RECORDING' menu.
The DVR can be configured to record continuously at a low image rate ('CONTINUOUS / MOTION RECORDING' menu),
and then increase to a higher image rate during an alarm condition. ('ALARM RECORDING' menu)
PANIC RECORDING SETUP
During a Panic Recording condition, the DVR will override all other recording settings and record continuously on
all channels as per the settings configured here.
Click on the 'ALARM RECORDING' submenu.
The layout of this menu is very similar to the
'CONTINUOUS / MOTION RECORDING' menu.
Click on the 'PANIC SETUP' submenu.
Click on the SIZE, FPS, QUALITY and AUDIO.
52