Table of Contents
Advertisement
RECORD SETUP
SIZE / FPS / QUALITY (continued)
Press ENTER. Recording settings for the selected time period are displayed.
SIZE: Recording resolutions of CIF (352x240), 2CIF (704x240) or D1 (704x480) can be selected for each channel.
FPS: Image rates between 1 and 30ips can be set for each channel.
QUALITY: Five different recording quality levels can be set for each channel.
AUDIO: If audio devices are connected to the DVR, any audio channel can be assigned to any of the video channels.
During playback, when a channel is viewed in full screen, the assigned audio channel will play back at the same time.
Adjust the values as desired and select OK to finish and return to the parameter menu.
Other time periods can be configured in the same manner.
NOTE: Remember that if the SCHEDULE MODE is set to WEEKLY, recording settings need to be changed for
each day as well as for each particular time.
NOTE: DR16HL supports a maximum recording rate across all channels of 480/400 images per second
at CIF (352x240) resolution. (DR8HL: 240/200ips)
As settings are adjusted, the 'frames available' at bottom left displays the number of available
images still remaining and must always be zero or higher.
If, while changing recording settings, this figure becomes negative, recording resolutions and/or
image rates must be lowered to increase the 'frames available' value to zero or above.
Click on the SIZE, FPS, QUALITY or AUDIO fields.
Use the
button to modify the value.
50
Advertisement
Table of Contents
