Hog 2Pc Application; Cleaning The Ipc Console And Touchscreens - High End Systems Hog iPC Handbook

Hog 2PC Application

When using the Hog iPC console with Hog 2PC, how do I transfer show files without
a floppy drive?
The Hog iPC console supports most USB storage devices that are compatible with Windows XP.
You can connect USB Floppy drives, USB flash drives, etc. or use the internal CDRW drive to
copy files to or from the hard drive.
Can I use Wholehog 2 console accessories with the Hog iPC console?
The Wholehog 2 Expansion wing and remote will not operate with the Hog iPC console.
Additionally the Wholehog 2 Overdrive unit will not operate with the Hog iPC console, however
the same functionality is achieved with external USB DMX widgets or a USB DMX Super
Widget.
Are Hog 2PC shows compatible with all Wholehog 2 operating system consoles?
You can load shows to and from Hog 2PC, Wholehog 2 consoles or rack mount units, Hog 1000
and Hog 500 consoles as long as the software versions for the Wholehog 2 operating system
match.

Cleaning the iPC Console and Touchscreens

WARNING: To avoid risk of electric shock, do not
disassemble the brick supply or display unit cabinet.
The unit is not user serviceable.
Always unplug the display unit from the power outlet
before cleaning.
To clean the display unit cabinet, use a cloth lightly dampened with a mild detergent.
Avoid getting liquids inside your touchscreen monitor.
If liquid does get inside, have a qualified service
technician check it before you power it on again.
To clean the console and touchscreens, use only a soft cloth damped with water. Glass cleaner
or other solvents will dull the finish of the console and the touchscreen case. Do not use
alcohol (methyl, ethyl or isopropyl) or any strong solvent. Do not use thinner or benzene,
abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could
scratch the surface.
Hog iPC Handbook
Maintenance and Troubleshooting
63