Setting Monitor Controls In The Osd Menu System; Osd Control Options; Monitor Display Angle - High End Systems Hog iPC Handbook

Setting Monitor Controls in the OSD Menu System

To navigate to a OSD option
1. Press the MENU button to display the OSD Menu.
2. Press the UP button or the DOWN button to navigate to a OSD control option.
3. When the function you want to change is displayed, press the SELECT button.
To adjust the Value of the function:
1. Pressing the UP button increases the value of the selected OSD control option.
2. Pressing the DOWN button decreases the value of the selected OSD control option.
3. After adjusting the values, press the SELECT button again and the monitor will
automatically save the changes.
Note: The OSD screen will disappear if no input activities are detected for
10 seconds.

OSD Control Options

Contrast
Brightness
V-Position
H-Position
Recall Defaults resets the factory OSD default settings.
RGB
Volume
YUV
Phase
Clock
OSD H-Position positions the OSD menu screen horizontally in the monitor display
OSD V-Position positions the OSD menu screen vertically in the monitor display
OSD Timeout
Auto Adjust
Language
Info

Monitor Display Angle

For viewing clarity, you can tilt the LCD forward (up to -5 degrees) or backward (up to 60
degrees.)
Hog iPC Handbook
adjusts the contrast or the values of color gain (RED, GREEN or BLUE).
adjusts the background Luminance of the LCD panel
adjusts the display window vertically on the screen
adjusts the display window horizontally on the screen
selects Color Temperature and sets R, G, B gain.
(not used)
adjusts the color intensity and tint
(not used)
(not used)
adjusts the amount of time in which the OSD will disappear
automatically refreshes the screen and exits the OSD
chooses between English, French, German, Spanish and Japanese for the OSD
displays the current monitor resolution and refresh rate
Using the Hog iPC Configuration Panel
31