Working With Hog 2Pc Show Files; Saving And Loading; Changing The Show Folder; Transferring Hog 2Pc Show Files - High End Systems Hog iPC Handbook

Working with Hog 2PC Show Files

Saving and Loading

The show will be saved to the folder you chose at start-up. You can switch between saving or
loading from the Hog iPC hard drive or an external USB drive by changing the show folder
between the external drive and a folder on the Hog iPC console.
CAUTION: Because Hog 2PC software does not automatically
save your show, you should save often. In addition, be sure to
save the show prior to exiting the Hog 2PC application.
Once running, Hog 2PC software will allow you to save to and load from either the hard drive
folder or an external USB drive.
CAUTION: To avoid corrupting a show file, do not unplug a USB
drive after loading a show from that drive.
To save a show while running the Hog 2PC application, press the Setup key then press
Save Show on the right touch screen.

Changing the Show Folder

To change the folder Hog 2PC uses to save and load shows, right click on the Frontpanel and
select 'Change Folder'. The Show Locator window will open to allow selection of a different
folder. You can also display the Show Locator window by opening the 'Change Show' window
in the Hog 2PC application and clicking on the 'Change Folder' button in the top toolbar.
After selecting a new folder and clicking on Ok, Hog 2PC will start using the folder you
specified. The folder currently in use by Hog 2PC is displayed at the bottom left of the 'Change
Show' window.

Transferring Hog 2PC Show Files

A Wholehog 2 show file is actually a folder containing several subfolders and files. Within the
Hog 2PC application and the Hog iPC Configuration Panel, this show folder is displayed as a
single Wholehog 2 show file.
If you copy this file to a CD or external drive, you will be able to access the subfolders and
files. To transfer a Wholehog 2 show from a Hog 2PC system to a Wholehog 2 console or vise
versa, be sure to include all items within the original Hog 2PC show folder or on the floppy
Hog iPC Handbook
Using Hog® 2PC Software
51