Attaching An Optional Third Monitor - High End Systems Hog iPC Handbook

USB Device Type
USB Flash Drives and
Hard Drives
USB Floppy and ZIP Drives Plug and Play
ELO Accutouch OR
Intellitouch monitors
USB Printers
All other USB Devices
CAUTION: Writing and reading to and from a USB flash drive
without properly ejecting the hardware may cause the USB
drive to become corrupt. It will no longer be recognized by any
windows machine.
BEFORE removing any USB memory, Click on the button on the
top right hand corner of the File Management screen in the Hog
iPC Configuration Panel
A confirmation dialog will indicate when it is safe to remove
the USB device.

Attaching an Optional Third Monitor

The Hog iPC console supports the addition of a 3rd monitor attached to the DVI port on the
back of the console (see Hog iPC Back Panel Connections on page 12). To connect a VGA
monitor, obtain a DVI to VGA adaptor from a computer store. You can also purchase 12" and
17" touchscreens with USB connections from High End Systems (see Hog iPC Console and
Optional Accessories on page 6). For information on enabling a third monitor, see Monitor 3
under Hardware Configuration on page 24.
Hog iPC Handbook
Plug and Play
Plug and Play
Can be enabled as a third monitor
Printing functionality is currently under development.
The Hog iPC console does not recognize or support USB devices other
than those listed above.
Connection Notes
System Setup
13